Wolff Training
We are excited to share with you the vibrant growth of our UZIN UTZ Campus, a beacon of learning shaped by a passionate commitment to providing unparalleled training and promoting excellence. Our campus goes beyond the typical training facility—it stands as a hub for interactive education, practical skills acquisition, and collaborative growth. At the core of our campus is a dynamic environment that reflects our unwavering pursuit of excellence. In this stimulating space, we not only offer effective training programs but also foster the advancement of skills and professional development. Integrating our reputable brands with the sophisticated practice of floor systems, UZIN UTZ delivers a compelling, immersive learning experience through our Technical Training days. These sessions pay tribute to our rich heritage of on-site technical expertise, a tradition of supporting the industry on countless job sites over the years. Our training programs are meticulously crafted for contractors who are keen to perfect their skills, acting as a gateway to a deeper understanding of our cutting-edge brands and systems. We warmly invite you to join us on this journey of discovery, to enhance your skills and gain mastery over a wide range of flooring solutions. Embrace this chance to elevate your career and become part of a community that values excellence. Step into the world of UZIN UTZ, where education is elevated to an art form and flooring becomes our masterpiece.
Training Course
MASTERING SUB-FLOOR PREPARATION TECHNIQUES - 2 DAY COURSE
Level up your flooring installation skills with this intensive two-day course focused on advanced sub-floor preparation, moisture control, smoothing & levelling systems and adhesive selection. Gain hands-on experience using market-leading tools and systems from UZIN and WOLFF.
WHAT WILL I LEARN?
Day 1:
- Master the foundation of every great flooring installation.
- Efficient Floor covering removal:
Learn how to safely and effectively remove existing floor coverings using WOLFF uplifting equipment for maximum efficiency. - Sub-floor Identification:
Distinguish between various sub-floor types and understand how to assess their suitability for new installations. - Contamination Removal:
Practical techniques for eliminating contaminants using grinders and sanding equipment – ensuring a clean, bond-ready surface. - Strengthening Weak Screeds:
Techniques for case hardening and stabilising fragile screeds to avoid costly failures. - Moisture Testing & Logging:
Understand how to carry out accurate moisture testing, interpret results, and document findings for compliance and system warranties. - Moisture Control Solutions:
Selecting and applying the correct moisture barrier based on site conditions and test results.
Day 2:
- Focus on surface perfection and choosing the right adhesive system for lasting success.
- Priming Techniques:
Explore different priming systems for a variety of sub-floor types, and understand when & why to use each one. - Mixing & Application Systems:
Set up efficient mixing stations and use pin rakes and smoothing trowels for even compound distribution. - Smoothing & Levelling Compound Application:
Hands-on training applying smoothing & levelling compounds over various substrates – from concrete to timber and calcium sulphate screeds. - Adhesive Selection & Installation:
Learn how to choose the correct adhesive for different floor coverings and site conditions. Includes full installation demonstrations using a variety of floor covering types. - Dry Adhesive Systems Overview:
Introduction to modern dry adhesives – where, why, and how to use them effectively. - WOLFF Hand Tools Showcase:
Get hands-on with a selection of WOLFF precision hand tools for cutting, prep, and installation – boosting speed and accuracy on-site.
2026 DATES:
- Tuesday 10th & Wednesday 11th February
- Tuesday 28th & Wednesday 29th April
- Thursday 06th & Friday 07th August
- Tuesday 27th & Wednesday 28th October
The cost for this course is £150 + VAT per person. Please note your booking is not confirmed until you have paid the invoice and received confirmation.
wHERE?
- Uzin Utz Campus, Stafford Technology Park, Staffordshire, ST18 0GE
MASTERING SUB-FLOOR PREPARATION AND WET ROOM INSTALLATION - 2 DAY COURSE
This hands-on, two-day course is designed for flooring professionals looking to expand their skills in sub-floor preparation and vinyl wet room installation. Learn to identify, prepare, and install over a range of substrates, with a strong focus on British Standards, moisture management, and best practices for cap and cove systems.
WHAT WILL I LEARN?
Day 1 - Sub-Floor Preparation & Moisture Management
Master the essentials of prepping a sub-floor for a compliant, watertight installation.
- Sub-floor type identification:
Learn to identify various substrates and assess their readiness for installation – including concrete, timber, screed, and refurbishment surfaces. - British standards overview:
Understand the key British Standards that govern sub-floor prep, moisture testing, and resilient floor installation in wet areas. - Moisture testing (Hands on)
Carry out moisture testing using different tools and techniques, including hygrometers, RH probes, and surface tests. Learn how to interpret and document results. - Damp proof membrane (DPM) solutions:
Choose and apply the right DPM system for your conditions – from moisture suppression layers to full-surface barriers. - Working with liquid screeds:
Learn how to correctly prepare calcium sulphate and liquid cement screeds, including laitance removal, sanding, priming, and drying requirements. - Crack repair techniques:
Identify the cause of cracking and apply appropriate repair compounds or epoxy injection systems. - Priming methods:
Understand the importance of primer compatibility with both sub-floor and smoothing compound, and how to apply them correctly. - Smoothing & levelling compounds:
Practical application of levelling compounds over a range of substrates, with focus on wet room performance requirements.
Day 2 – Cap & cove vinyl wet room installation
Take your LVT and vinyl skills further with this deep dive into wet room-specific installation.
- Setting out for wet room installations:
Learn how to accurately plan layouts for efficient fitting, minimising waste and achieving clean transitions around drains, doorways, and corners. - Installing cove formers & capping strips:
Step-by-step guidance on installing cap and cove systems – essential for hygienic and compliant wet rooms. - Vinyl templating for tight spaces:
Practice templating methods for small, awkward areas such as behind toilets, pipe boxes, and alcoves. - Coving sheet vinyl & cutting mitres:
Heat forming and cutting techniques to create seamless internal and external corners. - Vinyl welding techniques:
Learn to weld seams using hot air welding equipment for a watertight and professional finish. - Using tape systems in cap & cove installations:
Introduction to tape adhesives for vertical installations – when and how to use them effectively. - Adhesive selection & application:
Choose the correct adhesive for every surface – including wall-to-floor transitions, vertical bonding, and specialist wet areas. - Tool overview & usage:
Hands-on with WOLFF tools specifically designed for cutting, welding, coving, and installing wet room flooring systems.
2026 Dates:
- Wednesday 25th & Thursday 26th March
- Wednesday 24th & Thursday 25th June
- Tuesday 25th & Wednesday 26th August
- Tuesday 10th & Wednesday 11th November
The cost of this course is £150 + VAT per person. Please note your booking is not confirmed until you have paid the invoice and received confirmation.
Where?
Uzin Utz Campus, Stafford Technology Park, Staffordshire, ST18 0G
INTERMEDIATE SUB-FLOOR PREPARATION & LVT TECHNIQUE INTENSIVE WORKSHOP - 2 DAY COURSE
Step up your skills with this hands-on course tailored for flooring professionals ready to bridge the gap between basic knowledge and advanced practice. Learn how to prepare sub-floors to industry standards and install LVT (Luxury Vinyl Tile) with precision and confidence.
WHAT WILL I LEARN?
Day 1 – Sub-Floor Preparation & Moisture Management
- Lay the groundwork for successful, long-lasting installations.
- Subfloor identification:
Learn to recognise and assess different sub-floor types and understand how each impacts the installation process. - British standards overview:
A practical introduction to relevant British Standards in the flooring industry – what you need to know and how to stay compliant on-site. - Moisture testing techniques:
Perform moisture testing using a range of equipment and interpret the results to determine next steps. - Damp proof membrane (DPM) solutions:
Explore moisture mitigation methods, including when and how to apply DPM systems based on test outcomes. - Working with liquid screeds:
Understand the key differences between traditional and calcium sulphate liquid screeds, and how to correctly prepare them for LVT installation. - Crack repairs:
Learn how to identify and repair cracks effectively to ensure sub-floor stability and longevity. - Priming methods:
Get hands-on with different priming techniques and understand the importance of substrate compatibility. - Smoothing & levelling compounds:
Practical application of levelling compounds across various sub-floor conditions for a flawless finish.
Day 2 – LVT installation techniques
- Perfect your skills in working with Luxury Vinyl Tile, from layout to finishing.
- What is LVT?
A technical and visual overview of Luxury Vinyl Tile, including construction types, wear layers, and design formats. - LVT layout & setting out:
Step-by-step guide to setting out for Straight Lay, Diagonal, and Herringbone installations – ensuring symmetry and flow. - Cutting methods:
Learn accurate and efficient cutting techniques for detailed LVT installation using industry-standard tools. - Adhesive selection & application:
Match the right adhesive system to the sub-floor and LVT type – includes wet and pressure-sensitive adhesives. - Dry adhesive systems:
Introduction to dry adhesives – when to use them and tips for effective application. - Using WOLFF tools for LVT installations:
Hands-on with WOLFF hand tools designed for LVT cutting, fitting, and detailing – improve speed and finish quality.
2026 Dates :
- Tuesday 06th & Wednesday 07th January
- Thursday 09th & Friday 10th April
- Wednesday 01st & Thursday 02nd July
- Tuesday 20th & Wednesday 21st October
The cost of this course is £150 + VAT per person. Please note your booking is not confirmed until you have paid the invoice and received confirmation.
WHERE?
Uzin Utz Campus, Stafford Technology Park, Staffordshire, ST18 0GE
ADVANCED SUB-FLOOR & LVT TECHNIQUE INTENSIVE WORKSHOP- 3 DAY COURSE
Take your flooring expertise to the highest level with this intensive, hands-on training course designed for experienced installers and site professionals. Over three focused days, you’ll master complex sub-floor scenarios, advanced LVT techniques, and real-world problem solving — all backed by British Standards and cutting-edge tools and systems.
WHAT WILL I LEARN?
Take your flooring expertise to the highest level with this intensive, hands-on training course designed for experienced installers and site professionals. Over three focused days, you’ll master complex sub-floor scenarios, advanced LVT techniques, and real-world problem solving — all backed by British Standards and cutting-edge tools and systems.
Course Breakdown:
Day 1 – Advanced Sub-floor preparation & site evaluation
Get it right from the ground up – every time.
- Sub-floor eecognition & risk assessment:
In-depth evaluation of complex subfloor conditions including mixed substrates, historic buildings, and site anomalies. - Advanced moisture testing & documentation:
Comparative testing using hygrometers, carbide bomb, RH probes, and thermal imaging. Learn to log results for compliance, traceability, and warranty validation. - Contamination removal techniques:
Effective use of grinders, sanding systems, and HEPA extraction for safe, clean prep in sensitive or occupied environments. - Dealing with challenging screeds:
Best practices for working with calcium sulphate, anhydrite, case-hardened, and liquid cement screeds – including grinding, laitance removal, and priming. - Crack diagnosis & repair:
Structural vs. shrinkage cracks – choosing the right epoxy resins, repair mortars, and reinforcement methods. - DPM selection for complex conditions:
Multi-layer moisture control for damp or mixed substrates – when to use surface DPMs, sheet membranes, or hybrid systems.
Day 2 – Advanced Smoothing, Priming & Adhesive Systems
Perfect the prep – precision levels that prevent failure.
- Priming over difficult substrates:
Tiling, steel, asphalt, and over old adhesives – choosing the right primer for optimal bond and performance. - Multi-layer levelling systems:
Learn to apply self-levelling and fibre-reinforced compounds in multi-layer builds. Includes ramping, patching, and high-tolerance finishes. - Adhesive science – beyond the basics:
Deep dive into adhesive technology – wet-lay, pressure sensitive, reactive resins, and dry adhesives. Includes suitability testing and installation timing. - Using mixing stations & pin rakes for efficiency:
Set up your site for large-scale installation success with tips on flow control, batch mixing, and application tools. - WOLFF equipment masterclass:
Full walkthrough of professional WOLFF hand and power tools for prep and install – including safe use, maintenance, and time-saving hacks.
Day 3 – LVT Installation Mastery: Design, Detail & Delivery
Achieve flawless installations in the most demanding layouts.
- Advanced setting out & planning:
LVT installation planning for large, open spaces and intricate layouts – includes herringbone with border, diagonal with inlay, and feature areas. - Precision cutting & pattern matching:
Learn how to achieve perfect mitres, insets, and complex transitions using WOLFF hand tools and templates. - Dealing with tricky obstacles:
Real-world scenarios: fitting LVT around curves, pillars, awkward doorways, and under fixtures. - Dry adhesive installation:
Complete install of LVT using dry adhesive systems – when to use them and how to avoid failure. - Stair nosing & vertical surfaces:
Techniques for installing LVT on stairs and risers – includes nosing prep, adhesive choice, and mitring tips. - Defect prevention & troubleshooting:
Spot issues before they happen – from bubbling and gapping to bond failure and telegraphing. - Final Q&A and competency check:
Ask the experts, share site issues, and receive personalised advice from UZIN and WOLFF trainers.
2026 Dates :
- Monday 02nd - Wednesday 04th March
- Tuesday 26th - Thursday 28th May
- Tuesday 22nd - Thursday 24th September
- Tuesday 08th - Thursday 10th December
The cost of this course is £200 + VAT per person. Please note your booking is not confirmed until you have paid the invoice and received confirmation.
WHERE?
Uzin Utz Campus, Stafford Technology Park, Staffordshire, ST18 0GE
FAQ
Why should i attend?
Expert Guidance: Learn from industry experts with years of hands-on experience in the floor installation and preparation using Wolff Tools.
Comprehensive Curricular: Our carefully crafted curriculum covers everything from sub-floor assessment to advance installation techniques, ensuring you're well-equipped for any flooring project.
Hands-On Practice: Get hands-on experience with state-of-the-art Wolff Tools. Practice makes perfect, and we provide ample of opportunities for you to refine your skills in a controlled learning environment.
Cutting-Edge Techniques: Stay ahead of the curve with the latest techniques and innovations in floor preparation and installation. Our course is continuously update to reflect industry best practice.
Networking Opportunities: Connect with fellow professionals, share insights, and build a network that lasts a lifetime. Collaboration is key in the world of flooring, and our course fosters a community of like-minded individual.
How much does it cost?
- 1 day course is £100.00 + VAT per person
- 2 day course is £150.00 + VAT per person
- 3 day course is £200.00 + VAT per person
Lunch and refreshments are provided. Please note your booking is not confirmed until you have paid the invoice and received confirmation. Cancellation less than a week prior to the course will result in a full charge. Cancellation over a week before the course will result in a refund being provided.
Where is the training and what time?
UZIN UTZ UK Campus
Stafford Technology Park
Staffordshire
ST18 0GE
For the exact location, please use what3words: ///popped.joke.socket.
The courses run from 9:00 am to 17:00 pm.
How do I book a place?
For more information or to book a place:
Call: 01788 530 080
E-mail: training
